类型
PHP 手册

Strings

A string is series of characters. Before PHP 6, a character is the same as a byte. That is, there are exactly 256 different characters possible. This also implies that PHP has no native support of Unicode. See utf8_encode() and utf8_decode() for some basic Unicode functionality.

Note: It is no problem for a string to become very large. PHP imposes no boundary on the size of a string; the only limit is the available memory of the computer on which PHP is running.

Syntax

A string literal can be specified in four different ways:

Single quoted

The simplest way to specify a string is to enclose it in single quotes (the character ').

To specify a literal single quote, escape it with a backslash (\). To specify a literal backslash before a single quote, or at the end of the string, double it (\\). Note that attempting to escape any other character will print the backslash too.

Note: Unlike the two other syntaxes, variables and escape sequences for special characters will not be expanded when they occur in single quoted strings.

<?php
echo 'this is a simple string';

echo 
'You can also have embedded newlines in 
strings this way as it is
okay to do'
;

// Outputs: Arnold once said: "I'll be back"
echo 'Arnold once said: "I\'ll be back"';

// Outputs: You deleted C:\*.*?
echo 'You deleted C:\\*.*?';

// Outputs: You deleted C:\*.*?
echo 'You deleted C:\*.*?';

// Outputs: This will not expand: \n a newline
echo 'This will not expand: \n a newline';

// Outputs: Variables do not $expand $either
echo 'Variables do not $expand $either';
?>

Double quoted

If the string is enclosed in double-quotes ("), PHP will interpret more escape sequences for special characters:

Escaped characters
Sequence Meaning
\n linefeed (LF or 0x0A (10) in ASCII)
\r carriage return (CR or 0x0D (13) in ASCII)
\t horizontal tab (HT or 0x09 (9) in ASCII)
\v vertical tab (VT or 0x0B (11) in ASCII) (since PHP 5.2.5)
\f form feed (FF or 0x0C (12) in ASCII) (since PHP 5.2.5)
\\ backslash
\$ dollar sign
\" double-quote
\[0-7]{1,3} the sequence of characters matching the regular expression is a character in octal notation
\x[0-9A-Fa-f]{1,2} the sequence of characters matching the regular expression is a character in hexadecimal notation

As in single quoted strings, escaping any other character will result in the backslash being printed too. Before PHP 5.1.1, the backslash in \{$var} was not been printed.

The most important feature of double-quoted strings is the fact that variable names will be expanded. See string parsing for details.

Heredoc

A third way to delimit strings is the heredoc syntax: <<<. After this operator, an identifier is provided, then a newline. The string itself follows, and then the same identifier again to close the quotation.

The closing identifier must begin in the first column of the line. Also, the identifier must follow the same naming rules as any other label in PHP: it must contain only alphanumeric characters and underscores, and must start with a non-digit character or underscore.

Warning

It is very important to note that the line with the closing identifier must contain no other characters, except possibly a semicolon (;). That means especially that the identifier may not be indented, and there may not be any spaces or tabs before or after the semicolon. It's also important to realize that the first character before the closing identifier must be a newline as defined by the local operating system. This is \n on UNIX systems, including Mac OS X. The closing delimiter (possibly followed by a semicolon) must also be followed by a newline.

If this rule is broken and the closing identifier is not "clean", it will not be considered a closing identifier, and PHP will continue looking for one. If a proper closing identifier is not found before the end of the current file, a parse error will result at the last line.

Heredocs can not be used for initializing class members. Since PHP 5.3, this limitation is valid only for heredocs containing variables.

Example #1 Invalid example

<?php
class foo {
    public 
$bar = <<<EOT
bar
EOT;
}
?>

Heredoc text behaves just like a double-quoted string, without the double quotes. This means that quotes in a heredoc do not need to be escaped, but the escape codes listed above can still be used. Variables are expanded, but the same care must be taken when expressing complex variables inside a heredoc as with strings.

Example #2 Heredoc string quoting example

<?php
$str 
= <<<EOD
Example of string
spanning multiple lines
using heredoc syntax.
EOD;

/* More complex example, with variables. */
class foo
{
    var 
$foo;
    var 
$bar;

    function 
foo()
    {
        
$this->foo 'Foo';
        
$this->bar = array('Bar1''Bar2''Bar3');
    }
}

$foo = new foo();
$name 'MyName';

echo <<<EOT
My name is "$name". I am printing some $foo->foo.
Now, I am printing some 
{$foo->bar[1]}.
This should print a capital 'A': \x41
EOT;
?>

上例将输出:

My name is "MyName". I am printing some Foo.
Now, I am printing some Bar2.
This should print a capital 'A': A

Its also possible to use the Heredoc syntax to pass data to function arguments:

Example #3 Heredoc in arguments example

<?php
var_dump
(array(<<<EOD
foobar!
EOD
));
?>

Note: Heredoc support was added in PHP 4.

Nowdoc

Nowdocs are to single-quoted strings what heredocs are to double-quoted strings. A nowdoc is specified similarly to a heredoc, but no parsing is done inside a nowdoc. The construct is ideal for embedding PHP code or other large blocks of text without the need for escaping. It shares some features in common with the SGML <![CDATA[ ]]> construct, in that it declares a block of text which is not for parsing.

A nowdoc is identified with the same <<< seqeuence used for heredocs, but the identifier which follows is enclosed in single quotes, e.g. <<<'EOT'. All the rules for heredoc identifiers also apply to nowdoc identifiers, especially those regarding the appearance of the closing identifier.

Example #4 Nowdoc string quoting example

<?php
$str 
= <<<'EOD'
Example of string
spanning multiple lines
using nowdoc syntax.
EOD;

/* More complex example, with variables. */
class foo
{
    public 
$foo;
    public 
$bar;

    function 
foo()
    {
        
$this->foo 'Foo';
        
$this->bar = array('Bar1''Bar2''Bar3');
    }
}

$foo = new foo();
$name 'MyName';

echo <<<'EOT'
My name is "$name". I am printing some $foo->foo.
Now, I am printing some {$foo->bar[1]}.
This should not print a capital 'A': \x41
EOT;
?>

上例将输出:

My name is "$name". I am printing some $foo->foo.
Now, I am printing some {$foo->bar[1]}.
This should not print a capital 'A': \x41

Note: Unlike heredocs, nowdocs can be used in any static data context. The typical example is initializing class members or constants:

Example #5 Static data example

<?php
class foo {
    public 
$bar = <<<'EOT'
bar
EOT;
}
?>

Note: Nowdoc support was added in PHP 5.3.0.

Variable parsing

When a string is specified in double quotes or with heredoc, variables are parsed within it.

There are two types of syntax: a simple one and a complex one. The simple syntax is the most common and convenient. It provides a way to embed a variable, an array value, or an object property in a string with a minimum of effort.

The complex syntax was introduced in PHP 4, and can be recognised by the curly braces surrounding the expression.

Simple syntax

If a dollar sign ($) is encountered, the parser will greedily take as many tokens as possible to form a valid variable name. Enclose the variable name in curly braces to explicitly specify the end of the name.

<?php
$beer 
'Heineken';
echo 
"$beer's taste is great"// works; "'" is an invalid character for variable names
echo "He drank some $beers";   // won't work; 's' is a valid character for variable names but the variable is "$beer"
echo "He drank some ${beer}s"// works
echo "He drank some {$beer}s"// works
?>

Similarly, an array index or an object property can be parsed. With array indices, the closing square bracket (]) marks the end of the index. The same rules apply to object properties as to simple variables.

<?php
// These examples are specific to using arrays inside of strings.
// When outside of a string, always quote array string keys and do not use
// {braces}.

// Show all errors
error_reporting(E_ALL);

$fruits = array('strawberry' => 'red''banana' => 'yellow');

// Works, but note that this works differently outside a string
echo "A banana is $fruits[banana].";

// Works
echo "A banana is {$fruits['banana']}.";

// Works, but PHP looks for a constant named banana first, as described below.
echo "A banana is {$fruits[banana]}.";

// Won't work, use braces.  This results in a parse error.
echo "A banana is $fruits['banana'].";

// Works
echo "A banana is " $fruits['banana'] . ".";

// Works
echo "This square is $square->width meters broad.";

// Won't work. For a solution, see the complex syntax.
echo "This square is $square->width00 centimeters broad.";
?>

For anything more complex, you should use the complex syntax.

Complex (curly) syntax

This isn't called complex because the syntax is complex, but because it allows for the use of complex expressions.

In fact, any value in the namespace can be included in a string with this syntax. Simply write the expression the same way as it would have appeared outside the string, and then wrap it in { and }. Since { can not be escaped, this syntax will only be recognised when the $ immediately follows the {. Use {\$ to get a literal {$. Some examples to make it clear:

<?php
// Show all errors
error_reporting(E_ALL);

$great 'fantastic';

// Won't work, outputs: This is { fantastic}
echo "This is { $great}";

// Works, outputs: This is fantastic
echo "This is {$great}";
echo 
"This is ${great}";

// Works
echo "This square is {$square->width}00 centimeters broad."

// Works
echo "This works: {$arr[4][3]}";

// This is wrong for the same reason as $foo[bar] is wrong  outside a string.
// In other words, it will still work, but only because PHP first looks for a
// constant named foo; an error of level E_NOTICE (undefined constant) will be
// thrown.
echo "This is wrong: {$arr[foo][3]}"

// Works. When using multi-dimensional arrays, always use braces around arrays
// when inside of strings
echo "This works: {$arr['foo'][3]}";

// Works.
echo "This works: " $arr['foo'][3];

echo 
"This works too: {$obj->values[3]->name}";

echo 
"This is the value of the var named $name{${$name}}";

echo 
"This is the value of the var named by the return value of getName(): {${getName()}}";

echo 
"This is the value of the var named by the return value of \$object->getName(): {${$object->getName()}}";
?>

Note: Functions and method calls inside {$} work since PHP 5.

String access and modification by character

Characters within strings may be accessed and modified by specifying the zero-based offset of the desired character after the string using square array brackets, as in $str[42]. Think of a string as an array of characters for this purpose.

Note: Strings may also be accessed using braces, as in $str{42}, for the same purpose. However, this syntax is deprecated as of PHP 6. Use square brackets instead.

Warning

Writing to an out of range offset pads the string with spaces. Non-integer types are converted to integer. Illegal offset type emits E_NOTICE. Negative offset emits E_NOTICE in write but reads empty string. Only the first character of an assigned string is used. Assigning empty string assigns NUL byte.

Example #6 Some string examples

<?php
// Get the first character of a string
$str 'This is a test.';
$first $str[0];

// Get the third character of a string
$third $str[2];

// Get the last character of a string.
$str 'This is still a test.';
$last $str[strlen($str)-1]; 

// Modify the last character of a string
$str 'Look at the sea';
$str[strlen($str)-1] = 'e';

?>

Note: Accessing variables of other types using [] or {} silently returns NULL.

Useful functions and operators

Strings may be concatenated using the '.' (dot) operator. Note that the '+' (addition) operator will not work for this. See String operators for more information.

There are a number of useful functions for string manipulation.

See the string functions section for general functions, and the regular expression functions or the Perl-compatible regular expression functions for advanced find & replace functionality.

There are also functions for URL strings, and functions to encrypt/decrypt strings (mcrypt and mhash).

Finally, see also the character type functions.

Converting to string

A value can be converted to a string using the (string) cast or the strval() function. String conversion is automatically done in the scope of an expression where a string is needed. This happens when using the echo() or print() functions, or when a variable is compared to a string. The sections on Types and Type Juggling will make the following clearer. See also the settype() function.

A boolean TRUE value is converted to the string "1". Boolean FALSE is converted to "" (the empty string). This allows conversion back and forth between boolean and string values.

An integer or float is converted to a string representing the number textually (including the exponent part for floats). Floating point numbers can be converted using exponential notation (4.1E+6).

Note: The decimal point character is defined in the script's locale (category LC_NUMERIC). See the setlocale() function.

Arrays are always converted to the string "Array"; because of this, echo() and print() can not by themselves show the contents of an array. To view a single element, use a construction such as echo $arr['foo']. See below for tips on viewing the entire contents.

Objects in PHP 4 are always converted to the string "Object". To print the values of object members for debugging reasons, read the paragraphs below. To get an object's class name, use the get_class() function. As of PHP 5, the __toString method is used when applicable.

Resources are always converted to strings with the structure "Resource id #1", where 1 is the unique number assigned to the resource by PHP at runtime. Do not rely upon this structure; it is subject to change. To get a resource's type, use the get_resource_type() function.

NULL is always converted to an empty string.

As stated above, directly converting an array, object, or resource to a string does not provide any useful information about the value beyond its type. See the functions print_r() and var_dump() for more effective means of inspecting the contents of these types.

Most PHP values can also be converted to strings for permanent storage. This method is called serialization, and is performed by the serialize() function. If the PHP engine was built with WDDX support, PHP values can also be serialized as well-formed XML text.

String conversion to numbers

When a string is evaluated in a numeric context, the resulting value and type are determined as follows.

The string will be evaluated as a float if it contains any of the characters '.', 'e', or 'E'. Otherwise, it will be evaluated as an integer.

The value is given by the initial portion of the string. If the string starts with valid numeric data, this will be the value used. Otherwise, the value will be 0 (zero). Valid numeric data is an optional sign, followed by one or more digits (optionally containing a decimal point), followed by an optional exponent. The exponent is an 'e' or 'E' followed by one or more digits.

<?php
$foo 
"10.5";                // $foo is float (11.5)
$foo "-1.3e3";              // $foo is float (-1299)
$foo "bob-1.3e3";           // $foo is integer (1)
$foo "bob3";                // $foo is integer (1)
$foo "10 Small Pigs";       // $foo is integer (11)
$foo "10.2 Little Piggies"// $foo is float (14.2)
$foo "10.0 pigs " 1;          // $foo is float (11)
$foo "10.0 pigs " 1.0;        // $foo is float (11)     
?>

For more information on this conversion, see the Unix manual page for strtod(3).

To test any of the examples in this section, cut and paste the examples and insert the following line to see what's going on:

<?php
echo "\$foo==$foo; type is " gettype ($foo) . "<br />\n";
?>

Do not expect to get the code of one character by converting it to integer, as is done in C. Use the ord() and chr() functions to convert between ASCII codes and characters.


类型
PHP 手册